en1090belgelendirme logo 80  EN ISO 3834 80  EN 1090 2018

  • Kategori: Bilgiler
  • İlker Ergün tarafından yazıldı.
  • Gösterim: 5094

EN 1090-2 Standardında Adı Geçen Çelik İle İlgili Standartlar

EN 1090-2 Standardında Adı Geçen Çelik İle İlgili Standartlar Nelerdir?

en 1090 baslik

EN 10017, Steel rod for drawing and/or cold rolling — Dimensions and tolerances

EN 10021, General technical delivery conditions for steel products

EN 10024, Hot rolled taper flange I sections — Tolerances on shape and dimensions

EN 10025-1:2004, Hot rolled products of structural steels — Part 1: General technical delivery conditions

EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels

EN 10025-3, Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels

EN 10025-4, Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

EN 10025-5, Hot rolled products of structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

EN 10025-6, Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

EN 10029, Hot rolled steel plates 3 mm thick or above — Tolerances on dimensions and shape

EN 10034, Structural steel I and H sections — Tolerances on shape and dimensions

EN 10048, Hot rolled narr ow steel strip — Tolerances on dimensions and shape

EN 10051, Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels
— Tolerances on dimensions and shape

EN 10055, Hot rolled steel equal flange tees with radiused root and toes — Dimensions and tolerances on shape and dimensions

EN 10056-1, Structural steel equal and unequal leg angles — Part 1: Dimensions

EN 10056-2, Structural steel equal and unequal leg angles — Part 2: Tolerances on shape and dimensions

EN 10058, Hot rolled flat steel bars for general purpose — Dimensions and tolerances on shape and dimensions

EN 10059, Hot rolled square steel bars for general purposes — Dimensions and tolerances on shape and dimensions

EN 10060, Hot rolled round steel bars for general purposes — Dimensions and tolerances on shape and dimensions

EN 10061, Hot rolled hexagon steel bars for general purposes — Dimensions and tolerances on shape and dimensions

EN 10080, Steel for the reinforcement of concrete — Weldable reinforcing steel — General

EN 10088-1, Stainless steels — Part 1: List of stainless steels

EN 10088-2:2005, Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

EN 10088-3:2005, Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10131, Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming — Tolerances on dimensions and shape

EN 10139, Cold rolled uncoated mild steel narrow strip for cold forming — Technical delivery conditions

EN 10140, Cold rolled narrow steel strip — Tolerances on dimensions and shape

EN 10143, Continuously hot-dip coated steel sheet and strip — Tolerances on dimensions and shape

EN 10149-1, Hot-rolled flat products made of high yield strength steels for cold forming — Part 1: General delivery conditions

EN 10149-2, Hot-rolled flat products made of high yield strength steels for cold forming — Part 2: Delivery conditions for thermomechanically rolled steels

EN 10149-3, Hot-rolled flat products made of high yield strength steels for cold forming — Part 3: Delivery conditions for normalized or normalized rolled steels

EN 10160, Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)

EN 10163-2, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections — Part 2: Plate and wide flats

EN 10163-3, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections — Part 3: Sections

EN 10164, Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions

EN 10169, Continuously organic coated (coil coated) steel flat products — Technical delivery conditions

EN 10204, Metallic products — Types of inspection documents

EN 10210-1, Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

EN 10210-2, Hot finished structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimension and sectional properties

EN 10219-1, Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

EN 10219-2, Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 2: Tolerances, dimensions and sectional properties

EN 10268, Cold rolled steel flat products with high yield strength for cold forming — Technical delivery conditions

EN 10279, Hot rolled steel channels — Tolerances on shape, dimensions and mass

deleted text

EN 10296-2:2005, Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2: Stainless steel

EN 10297-2:2005, Seamless circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2: Stainless steel

EN 10346, Continuously hot-dip coated steel flat products — Technical delivery conditions

EN ISO 1127, Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
(ISO 1127:1992)

EN ISO 9445-1, Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)

EN ISO 9445-2, Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)

ISO 4997, Cold-reduced carbon steel sheet of structural quality

Bu site tamamen İlker Ergün'ün kendi çalışmaları ile oluşturulmuştur.
Eğer sizinde EN 1090 standardı ile ilgili çalışmalarınız var ise lütfen iletiniz.
Çalışmalarınızı sitede paylaşmak için lüften iletişime geçiniz.

Bu site yalnızca referans olmak ve bilgi vermek amacındadır.
Eğer EN 1090 standardına uygun imalat yapıyorsanız bu standardı satın almanız gerekmektedir.
Lütfen TSE sitesinden standardı sipariş ediniz.

This site provides only information about EN 1090 standard.
If you or your company manufacture goods according to this standard, you have to purchase this standard.
Please call TSE or BSI to order.

Bu sitede yayınlanan hiçbir makale / yazı / bilgi için site sahibi ve yazarları sorumlu tutulamaz.

Sitedeki bilgilere erişim sağlayarak bu Kullanım Koşullarını kabul etmiş sayılırsınız.
Lütfen Kullanım Koşullarını okuyunuz.

Bu siteleri kiralayabilir ya da satın alabilirsiniz.

www.en1090-2.org, www.wpsturkiye.com, www.wpsturkey.com, www.kaynakboyakontrol.com, www.paintweldinginspector.com, www.en1090belgelendirme.com, www.en1090certification.com
adreslerini kendi işleriniz için kullanmak isterseniz, bu siteleri kiralayabilir ya da satın alabilirsiniz.

Internet aramalarında ilk sırada olmak istiyorsanız bize ulaşın.

info@en1090-2.org

İlker Ergün
Back to top